subchapter_subject: "FOOD FOR HUMAN CONSUMPTION (CONTINUED)"
part_code: "172"
part_subject: "FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION"
subpart_code: "I"
subpart_subject: "Multipurpose Additives"
section_number: "172.870"
section_subject: "Hydroxypropyl cellulose."
cfr_reference: "21 CFR 172.870"
title_name: "Title 21"
title_subject: "Food and Drugs"
parts_covered: "Parts 170 to 199"
revised_date: "Revised as of April 1, 2019"
publication_date: "As of April 1, 2019"
contains_description: "Containing a codification of documents of general applicability and future effect"
publication_info: "Published by the Office of the Federal Register National Archives and Records Administration as a Special Edition of the Federal Register"
---
The food additive hydroxypropyl cellulose may be safely used in food, except standardized foods that do not provide for such use, in accordance with the following prescribed conditions:
(1)A cellulose ether containing propylene glycol groups attached by an ether linkage that contains, on an anhydrous basis, not more than 4.6 hydroxypropyl groups per anhydroglucose unit. The additive has a minimum viscosity of 10 centipoises for a 10 percent by weight aqueous solution at 25 degrees C.
(2)A cellulose ether containing propylene glycol groups attached by an ether linkage having a hydroxypropoxy (OC3H6OH) content of 5 to 16 percent weight in weight (w/w) on an anhydrous basis, i.e., 0.1 to 0.4 hydroxypropyl groups per anhydroglucose unit. The common name for this form of the additive is low substituted hydroxypropyl cellulose.
(b)The additive is used or intended for use as follows:
(1)The additive identified in paragraph (a)(1) of this section is used or intended for use as an emulsifier, film former, protective colloid, stabilizer, suspending agent, or thickener in food, in accordance with good manufacturing practice. The additive also may be used as a binder in dietary supplements, in accordance with good manufacturing practice.
(2)The additive identified in paragraph (a)(2) of this section is used or intended for use as a binder and disintegrator in tablets or wafers containing dietary supplements of vitamins and/or minerals. The additive is used in accordance with good manufacturing practice.