part_subject: "STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES (CONTINUED)"
subpart_code: "D"
subpart_subject: "DDD—Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration Units"
section_number: "60.2760"
section_subject: "What information must I submit following my initial performance test?"
cfr_reference: "40 CFR 60.2760"
title_name: "Title 40"
title_subject: "Protection of Environment"
parts_covered: "Part 60 (§ 60.500 to end of part 60 sections)"
revised_date: "Revised as of July 1, 2019"
publication_date: "As of July 1, 2019"
contains_description: "Containing a codification of documents of general applicability and future effect"
publication_info: "Published by the Office of the Federal Register National Archives and Records Administration as a Special Edition of the Federal Register"
---
You must submit the information specified in paragraphs (a) through (c) of this section no later than 60 days following the initial performance test. All reports must be signed by the facilities manager:
(a)The complete test report for the initial performance test results obtained under § 60.2700, as applicable;
(b)The values for the site-specific operating limits established in § 60.2675 or § 60.2680; and
(c)If you are using a fabric filter to comply with the emission limitations, documentation that a bag leak detection system has been installed and is being operated, calibrated, and maintained as required by § 60.2730(b).