part_subject: "STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES"
subpart_code: "Z"
subpart_subject: "Standards of Performance for Ferroalloy Production Facilities"
section_number: "60.264"
section_subject: "Emission monitoring."
cfr_reference: "40 CFR 60.264"
title_name: "Title 40"
title_subject: "Protection of Environment"
parts_covered: "Part 60 (§§ 60.1 to 60.499)"
revised_date: "Revised as of July 1, 2019"
publication_date: "As of July 1, 2019"
contains_description: "Containing a codification of documents of general applicability and future effect"
publication_info: "Published by the Office of the Federal Register National Archives and Records Administration as a Special Edition of the Federal Register"
---
(a)The owner or operator subject to the provisions of this subpart shall install, calibrate, maintain and operate a continuous monitoring system for measurement of the opacity of emissions discharged into the atmosphere from the control device(s).
(b)For the purpose of reports required under § 60.7(c), the owner or operator shall report as excess emissions all six-minute periods in which the average opacity is 15 percent or greater.
(c)The owner or operator subject to the provisions of this subpart shall submit a written report of any product change to the Administrator. Reports of product changes must be postmarked not later than 30 days after implementation of the product change.