part_subject: "STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES (CONTINUED)"
subpart_code: "A"
subpart_subject: "AAA—Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is Commenced After August 30, 1999 or for Which Modification or Reconstruction is Commenced After June 6, 2001"
section_number: "60.1080"
section_subject: "Where and when must I hold a public meeting on my draft materials separation plan?"
cfr_reference: "40 CFR 60.1080"
title_name: "Title 40"
title_subject: "Protection of Environment"
parts_covered: "Part 60 (§ 60.500 to end of part 60 sections)"
revised_date: "Revised as of July 1, 2019"
publication_date: "As of July 1, 2019"
contains_description: "Containing a codification of documents of general applicability and future effect"
publication_info: "Published by the Office of the Federal Register National Archives and Records Administration as a Special Edition of the Federal Register"
---
(a)You must hold a public meeting and accept comments on your draft materials separation plan.
(b)You must hold the public meeting in the county where you will construct the municipal waste combustion unit.
(c)You must schedule the public meeting to occur at least 30 days after you make your draft materials separation plan available to the public.
(d)You may combine the public meeting with any other public meeting required as part of any other Federal, State, or local permit review. However, you may not combine it with the public meeting required for the siting analysis under “Preconstruction Requirements: Siting Analysis” (§ 60.1140).
(e)You are encouraged to address eight topics at the public meeting for your draft materials separation plan:
(1)Expected size of the service area for your municipal waste combustion unit.
(2)Amount of waste you will collect in the service area.
(3)Types and estimated amounts of materials proposed for separation.