eCFR Reference Browser

---

title: "40 CFR §59.506"

source: "https://www.ecfr.gov/current/title-40/section-59.506"

title_number: "40"

volume_number: "6"

chapter_number: "Unknown"

subchapter_code: "C"

subchapter_subject: "AIR PROGRAMS (CONTINUED)"

part_code: "59"

part_subject: "NATIONAL VOLATILE ORGANIC COMPOUND EMISSION STANDARDS FOR CONSUMER AND COMMERCIAL PRODUCTS"

subpart_code: "E"

subpart_subject: "National Volatile Organic Compound Emission Standards for Aerosol Coatings"

section_number: "59.506"

section_subject: "How do I demonstrate compliance if I manufacture multi-component kits?"

cfr_reference: "40 CFR 59.506"

title_name: "Title 40"

title_subject: "Protection of Environment"

parts_covered: "Parts 53 to 59"

revised_date: "Revised as of July 1, 2019"

publication_date: "As of July 1, 2019"

contains_description: "Containing a codification of documents of general applicability and future effect"

publication_info: "Published by the Office of the Federal Register National Archives and Records Administration as a Special Edition of the Federal Register"

---

(a)If you manufacture multi-component kits as defined in § 59.503, then the Kit PWR must not exceed the Total Reactivity Limit.

(b)You must calculate the Kit PWR and the Total Reactivity Limit as follows:

(1)KIT PWR = (PWR(1) × W1) + (PWR(2) × W2) + . ... + (PWR(n) × Wn)

(2)Total Reactivity Limit = (RL1 × W1) + (RL2 × W2) + ... + (RLn × Wn).

(3)Kit PWR ≤Total Reactivity Limit.

§59.506 - How do I demonstrate compliance if I manufacture multi-component kits?