subpart_subject: "Calculations and Data Requirements"
section_number: "1065.670"
section_subject: "NO"
cfr_reference: "40 CFR 1065.670"
title_name: "Title 40"
title_subject: "Protection of Environment"
parts_covered: "Part 1060 to End"
revised_date: "Revised as of July 1, 2019"
publication_date: "As of July 1, 2019"
contains_description: "Containing a codification of documents of general applicability and future effect"
publication_info: "Published by the Office of the Federal Register National Archives and Records Administration as a Special Edition of the Federal Register"
---
See the standard-setting part to determine if you may correct NOX emissions for the effects of intake-air humidity or temperature. Use the NOX intake-air humidity and temperature corrections specified in the standard-setting part instead of the NOX intake-air humidity correction specified in this part 1065. If the standard-setting part does not prohibit correcting NOX emissions for intake-air humidity according to this part 1065, correct NOX concentrations for intake-air humidity as described in this section. See § 1065.650(c)(1) for the proper sequence for applying the NOX intake-air humidity and temperature corrections. You may use a time-weighted mean combustion air humidity to calculate this correction if your combustion air humidity remains within a tolerance of ±0.0025 mol/mol of the mean value over the test interval. For intake-air humidity correction, use one of the following approaches:
(a)For compression-ignition engines, correct for intake-air humidity using the following equation:
(b)For spark-ignition engines, correct for intake-air humidity using the following equation:
(c)Develop your own correction, based on good engineering judgment.