part_subject: "CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES"
subpart_code: "A"
subpart_subject: "Overview and Applicability"
section_number: "1039.20"
section_subject: "What requirements from this part apply to excluded stationary engines?"
cfr_reference: "40 CFR 1039.20"
title_name: "Title 40"
title_subject: "Protection of Environment"
parts_covered: "Parts 1000 to 1059"
revised_date: "Revised as of July 1, 2017"
publication_date: "As of July 1, 2017"
contains_description: "Containing a codification of documents of general applicability and future effect"
publication_info: "Published by the Office of the Federal Register National Archives and Records Administration as a Special Edition of the Federal Register"
---
The provisions of this section apply for engines built on or after January 1, 2006.
(a)You must add a permanent label or tag to each new engine you produce or import that is excluded under § 1039.1(c) as a stationary engine and is not required by 40 CFR part 60, subpart IIII, to meet the requirements of this part 1039, or the requirements of 40 CFR parts 89, 94 or 1042, that are equivalent to the requirements applicable to marine or land-based nonroad engines for the same model year. To meet labeling requirements, you must do the following things:
(1)Attach the label or tag in one piece so no one can remove it without destroying or defacing it.
(2)Secure it to a part of the engine needed for normal operation and not normally requiring replacement.
(3)Make sure it is durable and readable for the engine's entire life.
(5)Follow the requirements in § 1039.135(g) regarding duplicate labels if the engine label is obscured in the final installation.
(b)Engine labels or tags required under this section must have the following information:
(1)Include the heading “EMISSION CONTROL INFORMATION.”
(2)Include your full corporate name and trademark. You may instead include the fill corporate name and trademark of another company you choose to designate.
(3)State the engine displacement (in liters) and maximum engine power (or in the case of fire pumps, NFPA nameplate engine power).
(4)State: “THIS ENGINE IS EXEMPTED FROM THE REQUIREMENTS OF 40 CFR PARTS 89 AND 1039 AS A “STATIONARY ENGINE.” INSTALLING OR USING THIS ENGINE IN ANY OTHER APPLICATION MAY BE A VIOLATION OF FEDERAL LAW SUBJECT TO CIVIL PENALTY.”
(c)Stationary engines required by 40 CFR part 60, subpart IIII, to meet the requirements of this part 1039, or part 89, 94 or 1042, must meet the labeling requirements of 40 CFR 60.4210.